Electric Paddleboard Pump – 20psi

Electric Paddle Board Pump

20psi Electric Paddle Board Pump

SUP Inflatables has been hunting for an electric pump that’s both reasonably priced and works, Finally we have found it!

Wide pressure range selectable by easy of use dial indicator with automatic shut-off
Easy standard connection to cigarette plug LED indicators for diagnostics
Rubber base for maximum stability
Flow rate: 100L/min (1 speed)
Max Pressure:20.0 PSI
Amp Draw: 9A max / Power:DC12V
Suitable for: Paddleboards< Boats, Kites, Kayaks, and all kinds of inflatable products

What’s the difference between the electric pumps on our website?

1-speed paddleboard pump:

“What does 1 speed mean?” This electric pump operates at a single speed, which means it inflates your board more slowly.

Why is this pump slower? Inflating a paddleboard to 20 psi requires a significant amount of pressure through the pistons. To avoid burning out the pistons within the motor, the pump inflates slowly, allowing for the higher pressure while ensuring the pump’s durability.

How to use a single-speed pump to its full capacity: You may have noticed that inflating your board to 8 to 12 psi is relatively easy. The stronger you are, the more volume you can inflate without getting tired. To maximise the efficiency of a single-speed pump, start with a hand pump to get as much air into your board as possible (while it’s still easy for you). Then, switch to the electric pump to complete the inflation process. As with any pump, make sure the valve is in the upright position before inflating. When transitioning from the hand pump to the electric pump, the air will not escape from the board.

2-speed paddleboard pump:

A 2-speed paddleboard pump offers two different inflation speeds.

The first speed is faster and allows the board to be inflated from 0 pressure more quickly than a single-speed pump (though not faster than manual inflation). Once the pump reaches higher pressure, it slows down and continues inflating at a lower speed. This gradual inflation prevents the pistons from burning out.

2-speed pump with cooling fan:

This pump performs the same functions as the 2-speed pump, but it includes an integrated cooling fan. This feature allows the pump to inflate up to three boards simultaneously without overheating.

At SUP Inflatables we like to make your paddling experience easier whilst also looking after the planet, to get the most out of your pump we recommend that the car engine is running while the pump is in use, with this in mind, please use the manual pump to get the board to 5 to 10psi and then use the electric pump to finish up to the recommended psi for your board. Please also keep the pump clear of dirt and sand to prevent vents and fans in the pump getting blocked.