Outdoor Masters Shark II – Electric Paddleboard Pump

Outdoor Masters Shark II – Electric Pump

An electric paddleboard pump that Inflates 3 boards in one go – inflates to 20PSI

The Outdoor Master Shark II is a 2 speed pump with cooling fan so can inflate 3 boards without stopping to 20psi and also has a deflate option too. The paddleboard pump charges via a 12v DC power connector and is easily plugged into your car, making it convenient for outdoor use.

TEST APPROVED
The Shark II has passed multiple efficiency tests with CA65, CE and RoHS compliant certifications.

What’s the difference between the electric pumps on our website?

1-speed paddleboard pump:

“What does 1 speed mean?” This electric pump operates at a single speed, which means it inflates your board more slowly.

Why is this pump slower? Inflating a paddleboard to 20 psi requires a significant amount of pressure through the pistons. To avoid burning out the pistons within the motor, the pump inflates slowly, allowing for the higher pressure while ensuring the pump’s durability.

How to use a single-speed pump to its full capacity: You may have noticed that inflating your board to 8 to 12 psi is relatively easy. The stronger you are, the more volume you can inflate without getting tired. To maximise the efficiency of a single-speed pump, start with a hand pump to get as much air into your board as possible (while it’s still easy for you). Then, switch to the electric pump to complete the inflation process. As with any pump, make sure the valve is in the upright position before inflating. When transitioning from the hand pump to the electric pump, the air will not escape from the board.

2-speed paddleboard pump:

A 2-speed paddleboard pump offers two different inflation speeds.

The first speed is faster and allows the board to be inflated from 0 pressure more quickly than a single-speed pump (though not faster than manual inflation). Once the pump reaches higher pressure, it slows down and continues inflating at a lower speed. This gradual inflation prevents the pistons from burning out.

2-speed pump with cooling fan:

This pump performs the same functions as the 2-speed pump, but it includes an integrated cooling fan. This feature allows the pump to inflate up to three boards simultaneously without overheating.